Home Current Progress  | Donor  |  Engine  |  Chassis  |   Exterior  |  Interior

Body Panels  |   Sheet Metal  |  Engine  |  What's Left


Body Panels

The hardest work? the easiest? We let's put it this way since I have gotten this far it was probably on of the easiest things of the build. My tips for this is buy an air compressor and an air hammer!  Both of these items work better than any saws all.  SAVE AND LABEL EVERYTHING! especially wiring. You would be amazed what you will need during assembly or should I say re-assembly.
 
Get prepared to get dirty.  Begin removing all of the body panels.  I would not recommend trashing them because there are A LOT of people out there looking for the same parts you are removing. So take it easy and un bolt them right.
 

 


Copyright 2001,
PC Upgraders, Inc All rights reserved.
www.kitcarmagazine.com" is a trademark of
PC Upgraders, Inc